PERFORMANCE 4L80E… supports up to 1000HP

PERFORMANCE 4L80E… supports up to 1000HP

Our PERFORMANCE 4L80E series is ideal for street/strip driving and upgrades from a 4L60E/4L65E platform. It's rated at 1000 RWHP....

Price : $ 4,800.00 Add to cart

Description

PERFORMANCE 4L80E

 Shipped only to Commercial/Business Locations

Due to a current shortage of available core units, we will need your core to build.

This was our first 1000HP transmission offered at PerformaBuilt. We start with only late model cores for our performance line and application based core for our heavy duty line (Heavy Hauler). Each of these units features all the latest upgrades and high quality materials for assembly. Below is the breakdown of the Performance 4L80E build.

The unit is disassembled, each part carefully inspected and clearances are measured to meet our specifications not just the maximum clearance allowed by GM.

The case is carefully inspected, cleaned and re-inspected. Then it is coated with a special heat and oil resistant paint making for a very tough finish and a clean look.

Bushings are replaced and sized as needed to performance specifications.

The intermediate clutch sprag consists of an extreme duty intermediate sprag and roller assembly with specially prepared race and spiral ring, to prevent high RPM snap ring release.

The forward and direct clutch friction plates are replaced with heavy duty performance friction plates. The drums are then modified to accept additional friction plates and the apply area it self is altered to allow use of the entire piston area for apply in the forward drum. “Dished” cushion plates in these units are replaced with the TH400 style plates for additional reliability. These modifications will also result in a much firmer apply-into-gear from neutral/park to reverse/drive. But durability is significantly increased.

For the intermediate, direct and overdrive clutches we use the Raybestos Stage 1 Performance Friction Plates. These frictions exceed anything on the market for “performance street/strip” and “heavy duty” applications and are more than suitable for any application.

The intermediate overrun band is replaced with a heavy duty unit. This is mostly valuable in heavy duty truck applications, since this band is used to hold back when the transmission is manually put into 2nd gear while descending steep grades, etc. It will hold up significantly better to engine braking.

The low sprag is replaced with a heavy duty type and the low/reverse band is replaced with either a performance band, or a heavy duty band for our heavy hauler applications.

The Pump is carefully inspected and reconditioned for maximum durability and pressure. Special modifications are made to increase cooling and planetary lubrication.

Our own PerformaBuilt shift kit is installed in the valve body. This kit is custom set to the type of unit purchased. The heavy duty setup is for maximum hold with minimal “shift shock”, while Performance units are set for a more aggressive race feel, while maintaining a progressive shift that increases in firmness as you add more throttle.”

Each unit comes with a PerformaBuilt warranty according to the terms listed on our warranty page.

Additional information

WARRANTY

Please note our Warranty page. This transmission comes with a 1 Year Warranty.

2 YEAR WARRANTY UPGRADE

This option provides you a 2 Year Warranty on your PerformaBuilt transmission for an additional $300.

BUY A TORQUE CONVERTER

If you purchase a torque converter from us you will automatically get the 2 Year Warranty Upgrade.

HORSEPOWER RATING

This transmission will support up to 1000 RWHP.

NOTE

All units are available in either 2wd or 4X4. If you have a special application requiring a special adapter or output shaft, please contact us and we will be happy to provide it and quote a price for your special application.

YEARS

1989 to 2008 4L80E transmissions.

SHIPPING EXCEPTION

Unlike our other units, 4L80E transmissions must be shipped by truck freight. While shipping is still included in the transmission price, you must have access to a loading dock and/or a forklift to receive this unit.

QUESTIONS

If you have any questions feel free to call 1-888-744-6542, or email us at sales@performabuilt.com. We also have Live Chat during business hours; located in lower right corner of this webpage.

Level 2 Transmission

LEVEL 2 – PRO RACE 4L60E… supports up to 700HP

Our Pro Race series transmission is the finest built street/race automatic transmission in the industry. These transmissions are tough and built to handle whatever you dish out. It's rated at 700 RWHP...

$ 3,200.00 Add to cart

9.5-inch SRLS Billet

This is a billet backed converter intended for high horsepower applications with higher stall speeds....

$ 1,150.00 Select options

Heavy Hauler 4L60E

The PerformaBuilt Heavy Hauler 4L60E... Durability while maintaining reasonable shift quality. Specifically developed for commercial, heavy towing, and 4X4 vehicles....

$ 3,895.00 Add to cart
Level 3 Transmission

LEVEL 3 – INVINCIBLE 4L60E… supports up to 900HP

Our INVINCIBLE Series is our extreme offering in our street/strip performance transmissions. It's rated at 900 RWHP...

$ 4,100.00 Add to cart